Filename: Honda Universal Adapter Accord & Acura Series Users Manual
Language: English
File : PDF
Size: Mb
Honda Universal Adapter (Accord & Acura Series) USERS MANUAL cover page
Chief’s Limited One-Year Warranty &Liability CHIEF’S LIMITED ONE-YEAR WARRANTY& LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date of installation and/or purchase any of its products which do not perform satisfactorily due to defect caused by faulty material or workmanship. Chief’s obligation under this warranty is…
Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs in the corners of their center sections. (All Honda / Accord / Acura vehicles excluding Odessey.) These adapters allow the positioning of vertical jack tabs into a slot on the adapter’s top surface, and the attachment of 4 inch clamps to horizontal pinch- welds. The Honda adapters attach to UAS stands in two ways dependent upon anchoring tube used. Figure 1 shows attachment to the ears of a UAS clamp bar tube. Figure 2 shows attachment to the vertical surface of a UMS adapter tube. Figure 3 shows attachment to the vertical surface of a UMS pinchweld stand. Each illustration shows the Honda adapter in its lowest mounted position. IMPORTANT: Information on use of anchoring stands (including their attachment to repair system mainframes) appears in the UAS Users Manual and UMS Pinchweld Stand Users Manual. Spacers are provide with Honda adapters which allow height adjustment of horizontal clamps. The spacers, positioned between top surface of adapter and bottom surface of lower clamp half, are provided in these thicknesses: 1/8″ (3.17mm), 1/4″ (6.35mm), 1/2″ (12.7mm), and 1″ (25.4mm). This manual identifies the correct spacer(s) to use for each Honda / Accord / Acura vehicle. (See following pages.) Use the identified spacer(s) regardless of the anchoring setup and observe the following when applicable. • When using UMS adapter tubes in UAS stands, use not only the identified spacer(s) but also adjust vehicle’s specified datum height 3/4″ (19mm). • When using UMS pinchweld stands,use not only the identified spacer(s), but also adjust vehicle’s specified datum height 1/2″ (12.7mm
You can Download Honda Universal Adapter Accord & Acura Series Users Manual Below
If the information you are looking for less, you can use the sponsored links to get related information
Get the file Download here | PDF-HOME